THE PRODUCTS MANUFACTURED:
PE PIPES FOR GAS-DISTRIBUTION NETWORKS AND FOR INDUSTRIAL AND DOMESTIC WATER-SUPPLY NETWORKS
POLYETHYLENE, MULTI-LAYER, FILAMENT REINFORCED PIPES
PE TWO-LAYER PIPE WITH SLIDING INTERNAL LAYER FOR FIBER-OPTIC CABLE PROTECTION
EQUIPMENT FOR OIL AND GAS COMPLEX
PE PIPES FOR GAS-DISTRIBUTION NETWORKS AND FOR INDUSTRIAL AND DOMESTIC WATER-SUPPLY NETWORKS
Completely corrosion-free
PE-pipes are corrosion resistant to all kinds of grounds and to majority of all transportable substances, including chemically aggressive ones (acids, alkalis etc.).
Environment friendly
Pipe production and maintenance are environment friendly (Toxic dangerous matters, harmful for humans and environment are not being evolved during the process of pipe producing, welding and maintenance of pipelines).
Pipeline mounting simplicity
Pipe curve radius – not less than 10 external diameters. You will need less fasteners, pipeline design and construction gets easier. PE pipes are plastic, 3,5 – 4 times lighter than equivalent steel ones, they can be easily and safely welded at factory and field conditions; it is possible to produce and to transport on coils of 100 … 200 m; at less labour involvement. PE-pipes do not require complicated equipment as the steel ones do.
Safety, durability and low maintenance costs
Pipe maintenance temperature is from –50°C to +60°C. Smooth internal surface and lack of sediments provide PE-pipeline capacity, which is 25-30% higher compare to the steel one during all the life-time. If needed, (repair, reconstruction etc.) all parts of pipeline can be easily replaced.
PE-pipes for gas pipelines, GOST R 50838 – 95.
TU 2248-062-00203536-99 (diam. 315 мм) and TU 2248-048-00203536-2000 (SDR 9).
Production is certified and licensed, and has sanitary-epidemiological conclusion.
PE pressure pipes for pipelines of various purposes, including potable water – supply, GOST 18599 – 2001.
Production is certified and licensed, and has sanitary-epidemiological conclusion.
* Reference PE mass according to standard documentation;
** Production-run bags and coils for transportation by trucks and railway are given in the table.
By agreement, it is possible to produce bags and coils of other sizes, and also to complete bags according to the scheme "pipe in pipe". Pipes may be manufactured from customer‘s raw materials (customer's supply). Processing cost depends on size of order (min. set 10 tons.)
It is possible to produce pipes SDR 26, SDR 17, SDR 13,6, SDR 9 according to GOST 18599-2001.
Service life not less than 50 years. Warranty assurance of pipe storage before use not more than 2 years. Pipes should be stored in unheated storages or under shed.
POLYETHYLENE, MULTI-LAYER, FILAMENT REINFORCED PIPES
Advantages of reinforced multi-layer pipes:
- range of application – transportation of various substances (gas, oil, water, acids, salt solutions, liquids containing firm parts), with working pressure from 2 to 19 MPa;
- pipe life time – 50 years with margin of safety coefficient - 3;
- pipes are corrosion-resistant; maintenance temperature from - 40°C to + 60°C;
- have 2,5 … 3 times less weight compare to equivalent steel pipes;
- pipes with external diameter to the 150 mm inclusive can be manufactured in coils;
- several methods of pipe connection are developed, including use of couplings with incorporated electric heaters, thread and flange sectional and one-piece joints.
Warranty assurance of pipe storage before use is not more than 2 years.
Pipes should be stored in unheated storages or under a shed.
FILAMENT REINFORCED PE PIPES:
Polyester filament reinforced PE pipes, working pressure 1.98…7.17 MPa. TU 2248-068-00203536-2000
|
N° |
Pipe type |
Internal diameter, mm |
External diameter, mm |
Working pressure, MPa |
|
1. |
140/107-7 |
107 |
140 |
2,41 |
|
2. |
140/107-13 |
107 |
140 |
4,40 |
|
3. |
150/107-10 |
107 |
150 |
3,51 |
|
4. |
150/107-13 |
107 |
150 |
4,58 |
|
5. |
150/107-20 |
107 |
150 |
7,17 |
|
6. |
180/147-7 |
147 |
180 |
2,27 |
|
7. |
180/147-10 |
147 |
180 |
3,34 |
|
8. |
190/147-10 |
147 |
190 |
3,52 |
|
9. |
190/147-16 |
147 |
190 |
5,57 |
|
10. |
245/203-6 |
203 |
245 |
1,98 |
|
11. |
245/203-8 |
203 |
245 |
2,81 |
|
12. |
245/203-13 |
203 |
245 |
4,36 |
|
13. |
340/300-5,5 |
300 |
340 |
1,98 |
|
14. |
350/300-9 |
300 |
350 |
3,15 |
Aramid filament reinforced PE pipes, working pressure 5,8 … 19,0 MPa
TU 2248-058-00203536-99
|
N° |
Pipe type |
External diameter, mm |
Wall thickness, mm |
Working pressure, MPa |
|
1. |
140/107-22 |
140 |
16,5 |
7,5 |
|
2. |
140/107-30 |
140 |
16,5 |
10,0 |
|
3. |
150/107-42 |
150 |
21,5 |
14,3 |
|
4. |
150/107-55 |
150 |
21,5 |
19,1 |
|
5. |
180/147-17 |
180 |
16,5 |
5,8 |
|
6. |
180/147-22 |
180 |
16,5 |
7,7 |
|
7. |
190/147-33 |
190 |
21,5 |
11,2 |
|
8. |
190/147-42 |
190 |
21,5 |
14,9 |
|
9. |
245/203-24 |
245 |
21,0 |
8,3 |
|
10. |
245/203-33 |
245 |
21,0 |
11,1 |
|
11. |
350/300-24 |
350 |
25,0 |
8,0 |
PE TWO-LAYER PIPE WITH SLIDING INTERNAL LAYER FOR FIBER-OPTIC CABLE PROTECTION
Purpose – communication cable protection from external actions while laying into ground, in buildings, in cable sewage collectors.
- Pipes are manufactured by co extrusion method.
- Pipe maintenance temperature: - 50°C to + 65°C.
- Temperature - 120°C.
- Pipe curve radius: not less than 10 external diameters.
- Friction slip coefficient of pipe internal surface: 0,1.
- Warranty assurance of pipe storage before use is not more than 2 years.
- Pipes should be stored in unheated storages or under a shed.
- Pipes are connected with help of electric coupling.
PE pipe VОК, TU 2248-071-18425183-2000:
|
N° |
Type of pipe |
S х S1, mm |
D, mm |
Mass 1 linear/m in kg |
Type of delivery Coil L, m to |
|
1 |
25/21 |
2.0 х 0.2 |
25 |
0.20 |
3000 |
|
2 |
32/26 |
3.0 х 0.2 |
32 |
0.34 |
2500 |
|
3 |
40/35 |
2.4 х 0.3 |
40 |
0.38 |
2000 |
|
4 |
40/32 |
3.7 х 0.3 |
40 |
0.52 |
2000 |
|
5 |
50/42 |
3.7 х 0.3 |
50 |
0.66 |
1000 |
|
6 |
63/53 |
4.7 х 0.4 |
63 |
1.04 |
700 |
POLYETHYLENE FITTINGS
Reliable technologies of joints for gas, water and industrial polyethylene pipelines:
Polyethylene fittings:
|
Denomination |
Diameter, mm |
Purpose |
|
Couplings with incorporated electric heaters for underground gas pipelines, TU 2291-033-00203536-96. |
D 32, 63, 110, 160, 225 |
Welding of polyethylene pipes by means of electric couplings.
|
|
Polyethylene crane saddles with incorporated electric heaters, TU 2248-031-00203536-96. |
D 63, 110, 160, d 32 |
Cutting into acting gas pipelines (under pressure). |
|
Connection parts with extended stems for underground gas pipelines (angle bars, junctions, T-joints, bushes to flanges),
|
D 32, 63, 110, 160, 225 |
Applied in gas pipelines, pressure pipelines of various purpose with working pressure: gas – 0,64 MPa, (0,8 MPa); water – 1,25 MPa (1,6 MPa);
|
|
Welded connection parts of polyethylene pipes for pressure pipelines:
|
|
Made of polyethylene pipes with compliance certificate and sanitary and epidemiological conclusion to use for potable water. |
|
One-piece connections of polyethylene pipes with steel ones for gas pipelines and pressure pipelines.
|
Pipe PE80 (PE100)
|
- application of metal stop valves in polyethylene pipelines; - by-turn replacement of steel pipelines sections with polyethylene ones up to complete replacement of existing steel pipeline with polyethylene one; - cutting of branches of polyethylene pipes into existing steel pipeline and etc; - welding with steel pipes in accordance with normative documents for steel pipelines. |
|
Steel pipe D from 20 to 219 |
||
|
One-piece connections of polyethylene pipes with steel ones for pressure pipelines, TU 2248-001-21761654-02. |
Pipe PE63; PE80; PE100
|
|
|
Steel pipe D from 299 to 600 |
TRENCHER DOMINIQUE TRS-950
a specimen of high-speed earth-moving machinery of new generation
Specifications:
Installation of supplementary equipment is possible:
EQUIPMENT FOR OIL AND GAS COMPLEX
(based on chassis of automobile and tractor trailers)
- trailers, tractor semi-trailers, chassis
- automobile trailers
- mobile buildings
- equipment for oil and gas complex enterprises
|
Item denomination |
Model and technical data |
|
Trailers, tractor semi-trailers, chassis |
|
|
Dump-truck trailer, triaxial |
OZTP-8572 load capacity 13 tons (unloading to 2 sides) |
|
Dump-truck trailer, triaxial, load capacity 6.5 tons (hay lorry) |
OZTP-857220, unloading to 2 sides, body capacity 59.5 cub. m., overall dimensions:
|
|
Trailer chassis, triaxial, load capacity 15 tons |
847010, overall dimensions 9990 x 2500 x 1490 |
|
Trailer chassis for a dwelling block, platform length 9.6 m, triaxial,
|
857270, overall dimensions 11300 x 2900 x 1490 |
|
Trailer chassis, triaxial, equipped with jacks, load capacity 75 tons (in fixed position) |
847019, overall dimensions: 12300 x2500 x1490, load capacity without installed jacks 13 tons |
|
Trailer chassis, triaxial, equipped with conics (timber lorry), load capacity 14.4 tons |
847011, overall dimensions: 9990 x 2500 x 2600 |
|
Trailer platform OZTP-8572 |
857210 |
|
Chassis-platform, biaxial, load capacity 7 tons, platform has floor boarding |
IshMZ-857401, platform dimensions: 8000 x 2800 mm, height 1160 (1200) mm |
|
Chassis-platform, biaxial, load capacity 7 tons, without floor |
IshMZ-857402, platform dimensions: 8000 x 2800 mm |
|
Chassis-platform, biaxial, load capacity 7 tons, without floor |
IsMZ-857403, platform dimensions 6190 x 2800 mm |
|
Dump-truck trailer, biaxial, load capacity 7.2 tons |
857810 (unloading to 3 sides) |
|
Trailer – timber lorry, biaxial, load capacity 7.2 tons |
857872, overall dimensions: 10360 x 2500 x 2340 mm |
|
Trailer chassis, biaxial, load capacity 8 tons |
857810, overall dimensions: 7000 x 2400 x 11800 mm |
|
Semi-trailer, single-axis, all-metal body of "monokoc" type, load capacity 4.5 tons |
958810 (unloading to one side backwards) |
|
Semi-trailer, biaxial, all-metal body of "monocok" type, load capacity 10 tons |
95031 (unloading to one side backwards); Overall dimensions 5800 x 2300 x 2230 mm |
|
Set of front and rear trailer trolleys |
IshMZ-8574 04 |
|
Automobile trailers |
|
|
Trailer to "UAZ" motor car, load capacity 450 kg |
UAZ-810914 |
|
Trailer chassis, load capacity 0.6 tons |
UAZ-810940 |
|
Mobile buildings of "Uyut" series (manufacture under individual order is possible) |
|
|
Mobile bath-house (banya) BP 145 |
857413 |
|
Tool house |
857813, internal dimensions of caravan: 4200 x 2100 x 1850 |
|
Tool drying room |
857815, internal dimensions of caravan: 4200 x 2100 x 2300 |
|
Caravan for welding of polyethylene pipes at low temperatures |
857421, moveable station for welding of polyethylene pipes, d from 63 to 225 mm at field conditions |
|
Caravan-house for 4 people |
857412 |
|
Caravan-house for 8 people |
857412 |
|
Caravan-house for 3 people |
857412 |
|
Caravan-house for 5 people |
857412 |
|
Caravan-room for a foreman |
857416 |
|
Item denomination |
Model and technical data |
|
Equipment for enterprises of oil and gas complex (manufacture under individual order is possible) |
|
|
Semi-trailer – unit for cable unreeling |
951210, aimed for unreeling and mechanized assembly of power transfer leads, transportation of reel with leads on all kinds of roads and at field conditions |
|
Vibrating hydraulic cable layer |
KV-1, max d of cable – 25 mm; d of protection or gas pipes laying – 32, 40, 50, 63 mm, laying depth up to 1300 mm;
|
|
Chassis with fill up and circulating tank |
857282; applied for stationary use at drilling and repair of oil wells. Capacity is equipped with steam register for liquid heating. |
|
Trailer chassis, equipped with footbridge |
857215, applied for pipes stacking at drilling and repair of oil wells |
|
Trailer chassis, equipped with tank of 40 cub. m. |
857240, applied for injecting water into wells at stratum hydraulic rupture |
|
Trailer chassis, equipped with tank of 25 cub. m. |
857221 |
|
Trailer chassis with a tank for combustible and lubricating materials, 4.5 cub. m. |
8578011, aimed for supply of light types of petroleum products and used at drilling and repair of oil wells, elimination of breakdown at gas pipeline routes. |
|
Steam generator unit |
PGU315, aimed for generation of steam with temperature more than 388 °K (115 °C) and excessive pressure up to 0.07 MPa (0.7 kg f/cm2) for the purpose of heat supplying for technological processes in oil and gas complex enterprises work and in agriculture. |
|
Semi-trailer coil unreeling unit |
9588 PB, aimed for unreeling and laying of polyethylene pipes of 110-160 mm diameter, packed in coils when gas pipelines laying. |
|
Semi-trailer with water tank (4.4 cub. m) |
959810, aimed for transportation and supply of potable water for oil and gas complex teams.
|
|
Chassis with tank of 20 cub. m. |
847025 |
|
Chassis with tank of 10 cub. m. |
847027 |
|
Tank of 40 cub. m. without chassis |
847000 |