OAO Gazprom
Izhevsk Balloons

 

Catalogue >

 

IZHEVSK BALLOONS

 

Address: Studentcheskaya str., 7/3, Izhevsk, UR, 426069

Tel.: +7 (3412) 75-07-10, +7 (3412) 51-46-81; Fax: +7 (3412) 75-07-10, +7 (3412) 51-46-81

E-mail: Izh_Ballon@list.ru

 

THE PRODUCTS MANUFACTURED:

AUTOMOBILE GAS BOTTLES

SENSITIVE PIPES

SPRINKLER BALLOONS FOR WATER, AQUEOUS SOLUTION AND CHLADONES

MOBILE AUTO GAS-FILLING STATION PAGZ-2850-32-4

 


 

AUTOMOBILE GAS BOTTLES

Automobile gas bottles

 

The ballons are lightweight cylinders designed for the storage of gasses (Compressed Natural Gas cylinders).

Then consists of inner thin wall aluminum liner and with outer glass or carbon fiber laminates.

Main features:

- Operating pressure - up to 25 Mpa;
- Strength reng- not less than 2,6;
- Serviceability - 15 years
- Range of working temperatures + 50 °C

 

Specifications:

 

Gas cylinder types

Volume, Liters

Work pressure, (MPa)

Test pressure, (MPa)

Length, mm

Diameter, mm

Bulk, kg

BA 47.20.320/860 AL

47

20

30

860

320

31,5

BA 50.20.320/900 AL

50

20

30

900

33

BA 63.20.320/1140 AL

63

20

30

1140

320

42

BA 65.20.395/815 AL

65

20

30

815

395

40

BA 80.20.320/1360 AL

80

20

30

1360

50

BA 80.24.5.330/1360 AL

24,5

36,75

330

60

BA 100.20.320/1660 AL

100

20

30

1660

320

60

BA 100.24,5.330/1660 AL

24,5

36,75

330

72

BA 120.20.320/2000 AL

120

20

30

2000

320

73

BA 120.24,5.330/2000 AL

24,5

36,75

330

90

The certificate of conformity N° ROSS RU.AYa04. B03463 from 05.09.2000.

The license for production N° 36 IZ N° 007671 from 22.08.2000, is given by supervision of Russia.

 

 

SENSITIVE PIPES

 

Sensitive pipes are used in manufacturing of air-hydraulic cylinders, metal-composite balloon liners and in different areas of engineering.

The highest possible length of sensitive pipes is 1,5 m. The lowest possible thickness of the pipe wall amounts to 1,6-2,5 m depending on diameter.

These pipes are produced on the basis of hot-rolled and pressed pipes.

In contrast to similar products made by other companies the pipes manufactured by "Izhevsk Balloons" have higher stress-strain properties and afterflow as well as lower afterstrain.

 

 

SPRINKLER BALLOONS FOR WATER, AQUEOUS SOLUTION AND CHLADONES

Sprinkler balloons for water, aqueous solution and chladones

 

The balloons are made of aluminum alloy for 4,0 MPa working pressure and with carbon fiber laminate for 15,0 MPa working pressure.

Main features:

- Working pressure: 4,0 MPa (40 kg/cm2); 15,0 MPa (150 kg/cm2)

- Margin of safety - not less than 2,6

- Serviceability: 20 years

- Range of working temperatures: from -35 °C to +50 °C

Balloon perfection coefficient:

- pressure 4,0 MPa: 0,23 ... 0,28
- pressure 15,0 MPa: 0,48 ... 0,55

 

Specifications:

 

Balloon type

Volume, liter

Working pressure, MPa

Length, mm

Diameter, mm

BI-50-40

50

3,92

946

300,0

BI-50-150

14,72

946

315,6

BI-80-40

80

3,92

1011

370,0

BI-80-150

14,72

1011

387,0

BI-100-40

100

3,92

1211

370,0

BI-100-150

14,72

1211

387,0

BI-160-40

160

3,92

1811

370,0

BI-160-150

14,72

1811

387,0

Satisfy technical specifications BI-6601-9000TU and PB 10-115-96.

The license for production N° 36 IZ N° 007671 from 22.08.2000 is given by supervision of Russia.

The certificate of certificate of conformance N° ROSS RU.AYa04.H00577 from 16.09.2002.

 

 

MOBILE AUTO GAS-FILLING STATION PAGZ-2850-32-4

Mobile auto gas-filling station PAGZ-2850-32-4

The mobile auto gas-filling station is used for transportation of compressed natural gas from auto gas-filling compressor station to the place of car filling.

PAGZ is based on the vehicle KAMAZ 53212 and contains 44 balloons which volume amounts to 185 liters for working pressure 32 MPa.

The volume of transportable gas amounts to 2850 Nm3.

 


UP

Catalogue >